Constructed completely out of cast iron, the new Felder 500 Series saw unit represents a new era of running stability and efficiency.
4" cutting height with a 315 mm (12") saw blade
Dado capability up to ¾” (19.5 mm)
Zero point tilt
Oversized saw arbor with double bearing seats
Maximum motor power transfer with the Poly-V belt
Optimal extraction with the completely enclosed, below table extraction system
Precise height adjustment via precision linear guides
Precise double trunnion system
Tilt segment “Easy-Glide”:
- High durability
- Play free tilt
- Unaffected by dust
- Completely maintenance free
- No lubrication required

The electronically balanced saw arbor with dual bearing seat system is powered via a Poly-V belt. Combined this results in an almost perfect transmission of power to the saw blade.

The crosscut fence is 51” (1300 mm) for crosscuts between +45° and –45°. The fence can be attached to the sliding table with out the use of tools. The positive stop provides you with the exact 90° position.
The bevelled miter scale with hairline readout is visible from the operating area and thus allows exact reading of the required crosscut value.
The large crosscut fence stops are constructed in such a way that a small tongue on the stop fits perfectly into a groove on the fence. This means the crosscut fence stop remains firmly in place, especially useful when crosscutting pre-­mitered workpieces.

“X-Roll”, making a difference:
- Extremely smooth and precise sliding action! With the roller-bearing system there is no single point of contact
between bearings and guiding track, maximizing precision over the lifetime of the machine.
- Clean, dust-free guide rails obtained by special wipers and brushes.
- Smooth movement of the sliding table ensured by hardened steel, ground-bearing tracks.
- 6-year-warranty

The bevelled miter scale with hairline readout is visible from the operating area and thus allows exact reading of the required crosscut value.

The single handed adjustment system ensures quick and accurate setting of the rip fence. The standard rip capacity is 31” (800 mm) or an optional 49” (1250 mm). The easy to read rip scale is perfectly integrated into the saw table. The aluminum rip fence extrusion can be slid backwards to optimize the feed of workpieces.

For the professional processing of sheet material the saw can be equipped with the independantly adjustable scoring unit.

The Felder 500 Series saw assembly is fully compatible with dado tooling. Thanks to a removable table insert and flanges, specialized Felder dado tooling can be used.