|
PRODUCTS
Machine Range
|
|
 |
|
|
|
|
|
See and feel the sensational planing results!
With a 4 6/8” (120 mm) diameter, 4 or 6 knife FELDER quick change self aligning cutterblock, FELDER have taken planing to a new dimension.
|
|
|
Jointer-Planer knife quick and easy knife change, with self-setting cutterblock system!
4 or 6 knife cutterblock, Quick and effortless knife change, Self-setting knives, therefore high accuracy when being changed, No resinous residue on the clamping screws, Extremely quiet operation due to the enclosed design, Standard or Tersa knife systems are also offered, Cost saving thanks to low price of planer blades
|
|
|
Patented jointer adjustment system
Precise adjustment. This is obtained with the patented jointer table adjusting system that works in positive union with lateral prismatic guide ways.
|
|
|
Adjusting the depth of cut
The chip removal can be adjusted continuously to up to 2/8” (8 mm). The magnifying glass guarantees accurate reading of the scale. Precise and comfortable quick adjustment of cutting depth from the operator side of the infeed table.
|
|
|
Professional jointer fence
The jointer fence can be tilted to any degree between 90° and 45°. There are positive stops at 90° and 45°. The exceptional space-saving design of the jointer fence makes it possible to place your jointer-planer directly against the workshop wall and still use the entire jointing width.
|
|
|
Dual lifting jointer tables
It is comfortable and quick to change from jointing to planing on your machine. Tension springs are used to facilitate lifting of both jointer tables.
|
|
|
Trapezoid threaded spindle
4 Spindles with trapezoidal threads guarantee precise adjustment and allow the heaviest loads on the planer table. The table height adjustment guideways (A + B) also stabilize the table against lateral movement particularly in the outfeed direction.
|
|
|
Dust extraction hood.
Due to its extremely good design and large dimension, the chip extraction hood is very efficient.
|
|
|
(spring loaded, segmented infeed) pressure bar
On request we can deliver a spring loaded, segmented infeed pressure bar combined with infeed rubber roller for simultaneous processing of material of varying thickness.
|
|
|
Perfect technology
2 spring loaded pressure bars prevent “fluttering” of very thin workpieces during planing.
|
|
|
Height adjustment of the planer table with the digital clock handwheel
Planing accuracy to .001“ with the use of a handwheel and with intergrated digital display. Max. planing height 9⅞” (250 mm).
|
|
|
... with “Digi-Drive” just type it in
Enter required dimension, press start and the planer table will move accurately to the required position. Required and actual values are shown on LED displays. Further functions: incremental function, 4 programmable planer table positions.
|
|
|
|
