Constructed completely out of cast iron, the new Felder 700 Series saw unit represents a new era of running stability and efficiency.
4" cutting height with a 315 mm (12") saw blade
Dado capability up to ¾” (19.5 mm)
Electrical height adjustment with LED display
Zero point tilt
Oversized saw arbor with double bearing seats
Maximum motor power transfer with the Poly-V belt
Optimal extraction with the completely enclosed, below table extraction system
Precise height adjustment via precision linear guides
Precise double trunnion system
Tilt segment “Easy-Glide”:
- High durability
- Play free tilt
- Unaffected by dust
- Completely maintenance free
- No lubrication required

The electronically balanced saw arbor with dual bearing seat system is powered via a Poly-V belt. Combined this results in an almost perfect transmission of power to the saw blade.

The Felder 700 Series saw assembly is fully compatible with dado tooling. Thanks to removable flanges and table insert, the Felder designed, fully adjustable dado cutters can be used.

The crosscut fence is 43” (1100 mm) for crosscuts between +45° and –45°. The fence can be attached to the sliding table with out the use of tools. The positive stop provides you with the exact 90° position.
The bevelled miter scale with hairline readout is visible from the operating area and thus allows exact reading of the required crosscut value.
The large crosscut fence stops are constructed in such a way that a small tongue on the stop fits perfectly into a groove on the fence. This means the crosscut fence stop remains firmly in place, especially useful when crosscutting pre-­mitered workpieces.

The 102” (2600 mm) long telescopic crosscut fence can be effortlessly adjusted from 90° to 45°. A miter scale on the outrigger table allows for accurate adjustments. On request we will fit your outrigger table with the precision miter pin locating system. Locate your miter angles accurately time and again!

The electronic digital display, integrated in the rip fence, enables you to adjust with a precision to 1/1000 th of an inch. Optional

The scoring unit for cuttings in plastic laminated panels and two-sided veneers without tear-outs. Backlash-free height and lateral adjustment of the scoring saw blade. Drive power of the industrial scoring unit 1.0 HP.

The Felder precision sliding table has been designed to accept maximum loads while also remaining smooth running and accurate. The monoprofile of the sliding table and base guarantees maximum torsional strength at every temperature. Through the “X” positioning of the roller bearings the pressure load is optimally distributed to all sides. The “X-Roll” guiding system and the other numerous outstanding details will be patented to ensure their protection. So much precision and technology earns the right to the status of “World Class”.

The bevelled miter scale with hairline readout is visible from the operating area and thus allows exact reading of the required crosscut value.

“Power-Drive” gives you electronic height adjustment on the saw blade. Turn the control knob to adjust the blade height, displayed on a red LED display.

On request we can equip your “700 series” with start buttons for the main and scoring blades located directly on the sliding table, How about that for convenience!

The rip capacity comes standard with 31” (800 mm) or optional 49” (1250 mm). The rip fence almost hovers over the table. The single handed quick clamping and fine adjusment systems ensure quick and accurate setting of the rip fence. The easy to read rip scale is perfectly intergrated into the saw table. The aluminum rip fence plate can be adjusted foward and back to optimise the feed of work pieces. When working with narrow and thin cuts of wood or with the saw blade tilted, it can be inverted and used in the lying position.

On request: the digital cross-cut stop. For repeatable accuracy to .001” with large LED display.