|
PRODUCTS
Machine Range
|
|
 |
|
|
|
|
|
Electronic digital-display
The electronic digital display, integrated in the rip fence, enables you to adjust with a precision to 1/1000 th of an inch. Optional
|
|
|
The renowned FELDER 500 saw assembly
Stable and compact saw unit built to last:
- Cutting height of 4” with a 12” (315 mm) blade
- Double-sided support
- Smooth tilting action 0°–45°
- Support close to the saw blade on both sides
|
|
|
Precision sliding table-Guiding system “X-Roll”.
“X-Roll”, making a difference:
- Extremely smooth and precise sliding action! With the roller-bearing system there is no single point of contact
between bearings and guiding track, maximizing precision over the lifetime of the machine.
- Clean, dust-free guide rails obtained by special wipers and brushes.
- Smooth movement of the sliding table ensured by hardened steel, ground-bearing tracks.
- 6-year-warranty
|
|
|
crosscut fence
The crosscut fence 51” (1300 mm) for crosscuts between +45° and –45°. The fence can be attached to the sliding table with out the use of tools. The end stop provides you with the exact 90° position.
|
|
|
Stop scale
The bevelled miter scale with hairline readout is visible from the operating area and thus allows exact reading of the required crosscut value.
|
|
|
Precision miter index system: accuracy in setting angles
The double miter system on the outrigger table with telescopic stop 102“ is standard for Professional models.
It’s exactly this feature that allows you to execute very accurate miter cuts from +45° to –45°, in a quick and easy way.
For those who want even more accurate settings, we equip the outrigger table with the ”precision miter index system.“ With this you can select predrilled positioning stops in steps of 5°, but also at 22.5°, by means of the index locating pin at the telescopic stop from +45° to –45°.
|
|
|
The rip fence
The single handed adjustment system ensures quick and accurate setting of the rip fence. The standard rip capacity is 31” (800 mm) or an optional 49” (1250 mm). The easy to read rip scale is perfectly integrated into the saw table. The aluminum rip fence extrusion can be slid backwards to optimize the feed of workpieces.
|
|
|
Scoring unit
For the professional processing of sheet material the saw can be equipped with the independantly adjustable scoring unit.
|
|
|
to use a grooving cutter “Dado cutter”
The Felder 500 Series saw assembly is fully compatible with dado tooling. Thanks to a removable table insert and flanges, specialized Felder dado tooling can be used.
|
|
|
|
