|
PRODUCTS
Machine Range
|
|
 |
|
|
|
|
|
The Shaper Assembly: Precision down to the smallest detail
In every detail the heavy duty “Serie 900” Shaper range has been developed with long lasting durability and modern industry requirements in mind.
|
|
|
Variable speed control
Optimize your cutting speed to suit each and every job. Infinitely variable speed control, from 1500–11,000 rpm.
|
|
|
… with “Power-Drive” its all electric
Turn a knob for both spindle height and angle settings with a press button facility for fine adjustments. LED displays will show actual settings to .001” and one tenth of a degree respectively.
|
|
|
The “quick change” spindle system
Integrated into your tilting Spindle-Moulder is the Felder “quick change” spindle system which enables spindle changes within
30 seconds, without the use of tools. Instead of changing cutter blocks, simply swap spindles. Your F 900 can accommodate different spindle diameters, with a particular highlight the ability to mount a high speed router spindle with 16,000 rpm.
|
|
|
High-Speed Router Spindle
The high speed router spindle is designed for router shaft diameters of Ø ¼”–⅝” (6–16 mm) and a speed of 16,000 rpm.
|
|
|
The FELDER Shaper spindle tilts rearward: This is an important safety feature for you when working with different sized workpieces!
Tilting of the shaper spindle in the correct way on Felder “rearwards” with easy handling:
Safety, since there is no pinch point, No limitations on work piece height, Power feeders may be used without problems, Impeccable machined surface, Optimal chip removal
Forward tilting of the Shaper can be dangerous and has serious handling disadvantages:
Increased risk of accidents, Limited height of workpiece, Power feeders can not be used properly, Poor machined surface, Chip removal, poor or even impossible
|
|
|
The precision “240” Shaper fence
The “240” Shaper fence is standard equipment. The Shaper fence can accomodate tooling to a maximum of 9” (230 mm) and has a fine adjustment system on the spindle fence outfeed side. The integrated dust extraction cowling allows for efficient chip removal.
The Shaper table opening is 12⅝” (320 mm), an advantage when panel-raising, as the Shaper tooling can be lowered under the table.
|
|
|
safety bar guides
The safety bar guides, great for “end-grain” work (optional).
|
|
|
Hardened anodized aluminum fence plates
Hardened anodized aluminum fence plates are standard. Precise, fine adjustment on the removable shaper fence via a scale from –.4” to +1.38” (–10 to 35 mm).
|
|
|
dual dust extraction
The dual dust extraction for shaper via the shaper fence and the chip collecting bin under the cutter ensure that the machine remains clean and good working results are obtained.
|
|
|
MULTI fine adjustment system
The MULTI fine adjusting system allows quick adjustment of the shaper fence in relation to the cutter-head diameter. Also ensuring parallel guidance of the shaper fence.
Its quicker with the MULTI fine adjustment system!
Automatic repeat setting after removal of your fence, Parallel adjustments of the shaper fence, Fence can be pre-set to a desired position, Measurement scale for depth of cut
|
|
|
Shaper table opening: 12⅝” (320 mm)
The large table opening allows for maximum operator safety. For large dimension tooling, as used for tennoning and panel raising, the cutter can be conveniently positioned below the table.
|
|
|
Increase your working surface area as needed – Felder System Table Extensions
Since their invention in 1969, Felder system table extensions have become a very common and useful choice for most Felder owners. Within seconds and without the use of tools you are able to increase the working surface of your Felder – just like that!
|
|
|
Precise Tenons.
Accurate tenons are much easier with the FELDER X-Roll sliding table. This precision guiding system will accept maximum loads without compromising the smooth and accurate stroke of the sliding table.
|
|
|
Swing away device for power feeder
The “swing away” power feeder arm allows for maximum operating convenience.
|
|
|
Outrigger table
An optional outrigger table can be added to your sliding table (2000 mm/78” table required). With this valuable option, you can easily work with large work pieces e.g. Rebate a door with ease and precision.
|
|
|
|
