|
PRODUCTS
Machine Range
|
|
 |
|
|
|
|
|
Side trimming unit
Two diamond tipped spindle heads rotating in apposing directions, ensure a perfectly machined edge, before the edge material is attached. With the pre-milling unit, you will optain tear-free edges, every single time.
|
|
|
Corner rounding unit
An indispensable level of productivity No more time consuming post processing of the workpiece!
The Felder corner rounding unit „finishes“ workpiece corners (incl. soft forming and post forming materials) for edging materials from 0.4 to 3.0 mm thick and 45mm in height without reducing the feed rate. The solid cast iron construction, linear guides and tungsten carbide cutters ensure long term
precision. The corner rounding unit is controlled via the control panel.
|
|
|
Workpiece - chain feeder
Precise work-piece feeding with chain and drive rollers in spiral formation, with no scratch traces on the work piece surface of highly graded layered materials.
|
|
|
Tape feed for coiled and strip material
Automatic feeding of coiled material 0.4 to 3 mm thick and strip materials via a strip magazine (120 mm capacity).
|
|
|
Glue roller and glue pot
The Teflon coated glue pot has a capacity of 2 kg PVA hot melt adhesive granulate (ethylene vinyl acetate copolymers). The
machine is ready to operate after only 12 minutes!
The fine adjustable glue roller ensures that the correct amount of hot glue is applied to the differing types of edging material.
PUR (Polyurethane resin) hot melt adhesive granulate may be used in accordance with the glue manufacturer‘s processing guidelines.
|
|
|
Pressure roller
The pressure rollers consists of a large cylindrical roller and two additional pressure rollers as standard. These 2 secondary pressure rollers are conical and thereby apply increased pressure on both the upper and lower surface of the edging material. This spring loaded system ensures a perfect bond between edging material and the work piece
|
|
|
Guillotine
Pre-cutting of ABS and PVC edge material up to a thickness of 3 mm.
|
|
|
Sawing module With a 45° cut
The highly precise linear guides ensure that the twin saw blade cutting unit executes perfect cuts. The end cutting saw blades traverse at 45°, ensuring that the cut is tear free. It is possible to set a 20° bevel cut to trim thin edges.
|
|
|
Flush and Radius trimming module
The big advantage of the combination unit is the significant reduction in length of the machine. Changing between modules is both quick and easy, both of which are equipped with 2 mm radius heads as a standard. On request, the machine can also be equipped with a 3 mm head.
|
|
|
Scraping Unit
Fine tunes the edge radius as well as removing excess glue.
|
|
|
Flush scraping unit - Perfect “finish”
The manually selectable scraper knives ensure a perfect workpiece surface finish. Perfect “finish”
|
|
|
Buffing unit
Excellent finish for ABS- and PVC material. Optional installation of polishing solution spray applicator for the polishing heads.
|
|
|
Set up for the panel thickness
Quick and accurate adjustment of the panel thickness.
|
|
|
|
