| Technical data/ Configurator |
|
|
The system cutterblock
With an 3½” diameter (88 mm) knife cutting radius, knife cutter block and the unique Felder system cutterblock technology, the planed finish reaches a new higher level
Fifteen years ago, Felder introduced the double sided disposable planer knife system. After each cutterblock knife change, start again with perfectly adjusted machine edged planer knives. Its much faster and more economical than the traditional systems.
Its mere child’s play to change the planer knives. In less than a few minutes you can change either the 4 knife cutterblock. Felder planer knives are instantly ready for action!
|
|
|
The new FELDER “700” Saw assembly
Constructed completely out of cast iron, the new Felder 700 Series saw unit represents a new era of running stability and efficiency.
4” cutting height with a 315 mm (12”) saw blade
operates with dado blade up to 20 mm
Electronic height adjustment with LED display
Zero point tilt
Oversized saw arbor with double trunnions
Maximum motor power transfer from the Poly-V belt
Optimal extraction with the completely enclosed, below table extraction system
Precise height adjustment via precision linear guides
Precise double trunnion system
Tilt segment “Easy-Glide”:
- High durability
- Play free tilt
- Unaffected by dust
- Completely maintenance free
- No lubrication required
|
|
|
circular saw shaft
The electronically balanced saw arbor with dual bearing seat system is powered via a Poly-V belt. Combined this results in an almost 100 % transmission of power to the saw blade.
The saw arbor diameter on our machinery is a standard European size of 30 mm (1,18"). We offer this size of arbor for increased stability when performing a bigger cut and also more user safery when especially using dado tooling. The standard US size arbor is 16 mm (5/8"). This is almost half the diameter of our arbor and is intended for lighter machinery with small tooling. The European 30 mm diameter tooling is available for various suppliers throughout the US and existing tooling can also be resized to fit our machinery. Take a step "UP" in your machine and also in your tooling.
Please visit our on-line shop to view the range of tools we can offer.
Link: www.felder-tooling.us
|
|
|
Dado
The Felder 700 Series saw assembly is fully compatible with dado tooling. Thanks to removable flanges and table insert, the Felder designed, fully adjustable dado cutters can be used.
|
|
|
Workpiece stop edge
Continuous fence for ripping: Any dimension is possible: the fence will always be fixed in a position parallel to the sawblade. You’ll always have the best possible work surface.
|
|
|
Quick change spindle system
The advantages of the FELDER quick change spindle system: Easy, quick change of the spindle; ability to use 25, 30, 40, 50 mm, ¾’’ and 1 ¼’’ diameter spindles; high speed router spindle for router bits with 15,000 rpm; automatic repeatable setting for production work.
|
|
|
Tilt Bracket
There is no need to remove the feeder from the machine. With minimum effort the power feeder can be tilted out of the way when necessary, and then easily returned to operational position when needed.
|
|
|
Precise angle installation
No reading errors due to the vernier scale. No more time wasted due to arduous approximations of angle values. The advantage of the Felder degree index is that the stop is set and fixed with-out losing time or making reading errors. Highly precise index positions allow for the accurate production of polygons like 5.625º (32 sided), 11.25º (16 sided) and 22.5º (8 sided). In addition, index positions at 15º, 20º, 25º, 30º, 35º, 40º and 45º can be used when working with the fence in both the fore and aft positions on the outrigger. Every index position is equipped with a length compensator and individual fine adjustment. This highly precise Felder degree index system is adjusted at the factory. This cost effective index system integrates well into the machine design and will increase your productivity.
|
|
|
Mortising unit
Easy mortising: Operation with one hand by a lever and safe clamping of any work piece with an eccentric clamp.
|
|
|
Trapezoid threaded spindle
4 Spindles with trapezoidal threads guarantee precise adjustment and allow the heaviest loads on the planer table. The table height adjustment guideways
(A + B) also stabilize the table against lateral movement particularly in the outfeed direction.
|
|
|
crosscut fence
The crosscut fence is 43” (1100 mm) for crosscuts between +45° and –45°. The fence can be attached to the sliding table with out the use of tools. The positive stop provides you with the exact 90° position.
The bevelled miter scale with hairline readout is visible from the operating area and thus allows exact reading of the required crosscut value.
The large crosscut fence stops are constructed so that a small tongue on the stop fits perfectly into a machined groove on the fence. This keeps the stop firmly in place for both straight and mitered cuts.
|
|
|
The telescopic crosscut fence
The 102” (2600 mm) long telescopic crosscut fence can be effortlessly adjusted from 90° to 45°. A miter scale on the outrigger table allows for accurate adjustments. On request we will fit your outrigger table with the precision miter pin locating system, for quick repeatable accurate positioning of the miter angles.
|
|
|
Adjusting the depth of cut
Precise and comfortable quick adjustment of cutting depth from the operator side of the infeed table.
|
|
|
Patented jointer adjustment system
Accurate adjustment is obtained with Felder’s patented planer adjustment system, which incorporates lateral prismatic guide rails.
|
|
|
Dual lifting jointer tables
It is easy to change quickly from jointer to planer on your machine. 4 tension springs on each table help to raise the jointer tables.
|
|
|
Height adjustment of the planer table with the handwheel with integral digital indicator
Planing accuracy to .004” with the use of a handwheel and with intergrated digital display. Max. planing height 9⅞” (250 mm).
|
|
|
Outrigger tables “1300” and “1500”
The outrigger table “1300” comes as standard on
S-Professional models. The workpiece roller at the end of the outrigger assures an easy loading process. The telescopic fence can be positioned as desired from 90 to 45 degrees. For those who require even more support surface there is the optional upgrade to the “1500” outrigger at no additional cost.
|
|
|
Precision miter index system: accuracy in setting angles
The precision miter index system on the outrigger table allows you to freely select predrilled positioning stops in steps of 5 degrees, and also at 22.5 degrees, by means of the index locating pin at the telescopic stop from +45 to –45 degrees.
|
|
|
Dust extraction hood
Heavy chip loads are no problem for the chip extraction hood due to its efficient design and large dimension.
|
|
|
Electric planer table height adjustment “Power-Drive”
Turn the control switch for quick adjustment, fine adjustment with the push of a button. The LED display clearly shows the planer table position.
|
|
|
Electronically programmable planer table height adjustment “Digi-Drive”
Enter required dimension, press start and the planer table will move accurately to the required position. Required and actual values are shown on LED displays. Additional functions: incremental function and 4 programmable planer table positions.
|
|
|
Scoring unit
The scoring unit for cuttings in plastic laminated panels and two-sided veneers without tear-outs. Backlash-free height and lateral adjustment of the scoring saw blade. Drive power of the industrial scoring unit 1.0 HP.
|
|
|
Precision sliding table – with the
“X-Roll” guiding system
The Felder precision sliding table has been designed to accept maximum loads while also remaining smooth running and accurate. The monoprofile of the sliding table and base guarantees maximum torsional strength at every temperature. Through the “X” positioning of the roller bearings the pressure load is optimally distributed to all sides. The “X-Roll” guiding system and the other numerous outstanding details will be patented to ensure their protection. So much precision and technology earns the right to the status of “World Class”.
|
|
|
The new FELDER “700” Shaper assembly
With a completely new design, the Felder “700” spindle unit sets new standards!
4½” (115 mm) under the nut capacity
Table opening: 9”
(230 mm)
Quick change system for shaper spindle
4 operating speeds (3500, 6500, 8000, 10,000 rpm)
Speed changes are done from the front of the machine
Fully compatible with high speed router spindle at 15,000 rpm
Rearward tilt 0° to 45°
Electronic height adjustment with LED display
Precise double trunnion system
Dovetail guidance system for height adjustment
Maximum motor power transfer from the Poly-V belt
Excellent vibration absorption from heavy cast iron unit
Tilt segment “Easy-Glide”:
- High durability
- Play free tilt
- Unaffected by dust
- Completely maintenance free
- No lubrication required
|
|
|
High-Speed Router Spindle
The high speed router spindle is designed for router shaft diameters of Ø ¼” – ⅝”
(6–16 mm) and a speed of 15,000 rpm.
|
|
|
Small details – huge impact!
The tilting segment on the Felder 700 series has one small but important detail: it is completely free of lubrication!
|
|
|
Shaper spindle tilting
All Felder shapers have standard equipment including a tilting shaper spindle 90°–45°. Due to the tilting shaper spindle, the range of applications and savings of tooling cost may be much higher than you have expected. Using the handwheel causes the whole shaper spindle unit to tilt to the desired angle easily and smoothly.
|
|
|
The “240“ shaper fence
The ”240“ shaper fence is standard equipment on the shaper units. The shaper fence can accomodate tooling to a maximum of 9“
(230 mm) and has a micro-adjustment on the shaper fence outfeed side. The integrated dust extraction cowling allows for chip removal. The spindle table opening is 9“ (230 mm). This allows the spindle with the cutterhead attached to be lowered below the table in some cases.
|
|
|
MULTI fine adjustment system
The Multi-fine adjustment system allows quick and precise adjustment of the shaper fence. This time saving feature reduces setup time and the number of test cuts that are required. The whole fence can also be removed and then returned to its exact position.
- Automatic repeat setting after removal of your fence
- Parallel adjustments of the shaper fence
- Fence can be pre-set to a desired position
- Measurement scale for depth of cut
|
|
|
Optional: Electronic Height Adjustment with „Power-Drive“
More than 50% of our clients now choose the electronic height adjustment for the shaper spindle.
|
|
|
Variable speed control
To optimize cutting speed for each job an optional Variable Speed Control (1500 to 11,000 rpm) is available.
|
|
|
Toolless knife adjustment with an accuracy of .1 mm. This is a standard feature of your Felder machine.
The system cutterblock: 4-knife cutterblock, Quick and effortless knife change, Self aligning knives are perfectly set each and every time! , No resin buildup on the clamping screws, Extremely quiet operation due to the enclosed design, Standard or Tersa knife systems are also offered, Cost savings due to the 2 sided low cost knives
|
|
|
Perfect technology
2 spring loaded pressure bars prevent chatterine of very thin workpieces during planing.
|
|
|
Tennoning and slotting
The highest accuracy is assured for standard shaping work and when using large cutters for tenoning with Felder shapers.
|
|
|
The Felder rearward tilting spindle is the correct way for easy and safe operation:
- Safety, since there is no pinch point
- No limitations on work piece height
- Problem free power feeder operation
- Impeccable workpiece finish
- Optimal chip removal
|
|
|
“Power-Drive” – electronic raise/lower and tilt of the blade
“Power-Drive” gives you electronic height adjustment on the saw blade. Turn the control knob to adjust the blade height, displayed on a red LED display.
|
|
