G 560

» Details

zoom	Operating panel with LCD display and keypad - Glue temperature settings - Automatic glue temperature decrease - Individual stations can be selected and disengaged - Counter for total meters of material used - Display of the maintenance intervals - Plain text error messages

zoom	Edge jointing unit Two diamond tipped shaper cutters rotating in apposing directions, ensure a precise machined edge, before the edge material is attached. With the pre-milling unit, you will optain tear-free edges, every single time.

zoom	Workpiece - chain feeder Precise work-piece feeding with chain and drive rollers in spiral formation, with no scratch traces on the work piece surface of highly graded layered materials.

zoom	Tape feed for coiled and strip material Automatic feeding of coiled material 0.4 to 3 mm thick and strip materials via a strip magazine (120 mm capacity).

zoom

Glue roller and glue pot The Teflon coated glue pot has a capacity of 2 kg PVA hot melt adhesive granulate (ethylene vinyl acetate copolymers). The machine is ready to operate after only 12 minutes! The fine adjustable glue roller ensures that the correct amount of hot glue is applied to the differing types of edging material. PUR (Polyurethane resin) hot melt adhesive granulate may be used in accordance with the glue manufacturer‘s processing guidelines.

zoom

Pressure roller The pressure rollers consists of a large cylindrical roller and two additional pressure rollers as standard. These 2 secondary pressure rollers are conical and thereby apply increased pressure on both the upper and lower surface of the edging material. This spring loaded system ensures a perfect bond between edging material and the work piece

zoom	Guillotine Pre-cutting of ABS and PVC edge material up to a thickness of 3 mm (⅛”).

zoom	Sawing module With a 45° cut The highly precise linear guides ensure that the twin saw blade cutting unit executes clean cuts. The end cutting saw blades traverse at 45°, ensuring that the cut is tear free. It is possible to set a 20° bevel cut to trim thin edges.

zoom

Flush and Radius trimming module The big advantage of the combination unit is the significant reduction in length of the machine. Changing between modules is both quick and easy, both of which are equipped with 2 mm radius heads as a standard. On request, the machine can also be equipped with a 3 mm head.

zoom	Scraping Unit Fine tunes the edge radius as well as removing excess glue.

zoom	Flush scraping unit - Flawless “finish” The manually selectable scraper knives ensure a perfect workpiece surface “finish”. Flawless “finish”

zoom	Buffing unit Excellent finish for ABS- and PVC material. Optional installation of polishing solution spray applicator for the polishing heads.

zoom	Set up for the panel thickness Quick and accurate adjustment of the panel thickness.