KF 700 S Professional

Constructed completely out of cast iron, the new Felder 700 Series saw unit represents a new era of running stability and efficiency.
4” cutting height with a 315 mm (12”) saw blade
operates with dado blade up to 20 mm
Electronic height adjustment with LED display
Zero point tilt
Oversized saw arbor with double trunnions
Maximum motor power transfer from the Poly-V belt
Optimal extraction with the completely enclosed, below table extraction system
Precise height adjustment via precision linear guides
Precise double trunnion system
Tilt segment “Easy-Glide”:
- High durability
- Play free tilt
- Unaffected by dust
- Completely maintenance free
- No lubrication required

The electronically balanced saw arbor with dual bearing seat system is powered via a Poly-V belt. Combined this results in an almost 100 % trans­mission of power to the saw blade.

The saw arbor diameter on our machinery is a standard European size of 30 mm (1,18"). We offer this size of arbor for increased stability when performing a bigger cut and also more user safery when especially using dado tooling. The standard US size arbor is 16 mm (5/8"). This is almost half the diameter of our arbor and is intended for lighter machinery with small tooling. The European 30 mm diameter tooling is available for various suppliers throughout the US and existing tooling can also be resized to fit our machinery. Take a step "UP" in your machine and also in your tooling.

Please visit our on-line shop to view the range of tools we can offer.
Link: www.felder-tooling.us

The Felder 700 Series saw assembly is fully compatible with dado tooling. Thanks to removable flanges and table insert, the Felder designed, fully adjustable dado cutters can be used.

No reading errors due to the vernier scale. No more time wasted due to arduous approximations of angle values. The advantage of the Felder degree index is that the stop is set and fixed with-out losing time or making reading errors. Highly precise index positions allow for the accurate production of polygons like 5.625º (32 sided), 11.25º (16 sided) and 22.5º (8 sided). In addition, index positions at 15º, 20º, 25º, 30º, 35º, 40º and 45º can be used when working with the fence in both the fore and aft positions on the outrigger. Every index position is equipped with a length compensator and individual fine adjustment. This highly precise Felder degree index system is adjusted at the factory. This cost effective index system integrates well into the machine design and will increase your productivity.

The crosscut fence is 43” (1100 mm) for crosscuts between +45° and –45°. The fence can be attached to the sliding table with out the use of tools. The positive stop provides you with the exact 90° position.
The bevelled miter scale with hairline readout is visible from the operating area and thus allows exact reading of the required crosscut value.
The large crosscut fence stops are constructed so that a small tongue on the stop fits perfectly into a machined groove on the fence. This keeps the stop firmly in place for both straight and mitered cuts.

The electronic digital display, integrated in the rip fence, enables you to adjust with a precision to 1/1000 th of an inch. Optional

The Felder device for tilting the feeder away means the power feeder always remains on the machine and can be used at any moment without problems.

The outrigger table “1300” comes as standard on
S-Professional models. The workpiece roller at the end of the ­outrigger assures an easy loading process. The ­telescopic fence can be positioned as desired from 90 to 45 degrees. For those who require even more support surface there is the optional upgrade to the “1500” outrigger at no ­additional cost.

The precision miter index system on the outrigger table allows you to freely select predrilled positioning stops in steps of 5 degrees, and also at 22.5 degrees, by means of the index locating pin at the telescopic stop from +45 to –45 degrees.

The scoring unit for cuttings in plastic laminated panels and two-sided veneers without tear-outs. Backlash-free height and lateral adjustment of the scoring saw blade. Drive power of the industrial scoring unit 1.0 HP.

The Felder precision sliding table has been designed to accept maximum loads while also remaining smooth running and accurate. The monoprofile of the sliding table and base guarantees maximum torsional strength at every temperature. Through the “X” positioning of the roller bearings the pressure load is optimally distributed to all sides. The “X-Roll” guiding system and the other numerous outstanding details will be patented to ensure their protection. So much precision and technology earns the right to the status of “World Class”.

With a completely new design, the Felder “700” ­spindle unit sets new standards!
4½” (115 mm) under the nut capacity
Table opening: 9”
(230 mm)
Quick change system for shaper spindle
4 operating speeds (3500, 6500, 8000, 10,000 rpm)
Speed changes are done from the front of the machine
Fully compatible with high speed router spindle at 15,000 rpm
Rearward tilt 0° to 45°
Electronic height adjustment with LED display
Precise double trunnion system
Dovetail guidance system for height adjustment
Maximum motor power transfer from the Poly-V belt
Excellent vibration absorption from heavy cast iron unit
Tilt segment “Easy-Glide”:
- High durability
- Play free tilt
- Unaffected by dust
- Completely maintenance free
- No lubrication required

The high speed router spindle is designed for router shaft diameters of Ø ¼” – ⅝”
(6–16 mm) and a speed of 15,000 rpm.

The tilting segment on the Felder 700 series has one small but important detail: it is completely free of lubrication!

All Felder shapers have standard equipment including a tilting shaper spindle 90°–45°. Due to the tilting shaper spindle, the range of applications and savings of tooling cost may be much higher than you have expected. Using the handwheel causes the whole shaper spindle unit to tilt to the desired angle easily and smoothly.

Accurate tenons are much easier with the Felder “X-Roll” sliding table. This precision guiding system will accept maximum loads without compromising the smooth and accurate stroke of the sliding table. The “X” configuration of the roller bearings optimally distributes work-piece weight to all sides. With conventional sliding tables, ball bearings are used in the guiding system. A ball bearing system creates a singular point of contact between the bearings and the flat guiding tracks, causing premature wear that compromises accuracy. The “singular point contact” will eventually wear grooves into the tracks and as a result, sideways play will develop in the sliding table. It is physically impossible for the “X-Roll” system (with roller bearing lineal contact); to wear grooves into the guiding tracks, hence the system will allways remain play free and ­accurate. The sliding table is backed by a 6 year ­factory guarantee.

The ”240“ shaper fence is standard equipment on the shaper units. The shaper fence can accomodate tooling to a maximum of 9“
(230 mm) and has a micro-adjustment on the shaper fence outfeed side. The integrated dust extraction cowling allows for chip removal. The spindle table opening is 9“ (230 mm). This allows the spindle with the cutterhead attached to be lowered below the table in some cases.

The Multi-fine adjustment system allows quick and precise adjustment of the shaper fence. This time saving feature reduces setup time and the number of test cuts that are required. The whole fence can also be removed and then returned to its exact position.
- Automatic repeat setting after removal of your fence
- Parallel adjustments of the shaper fence
- Fence can be pre-set to a desired position
- Measurement scale for depth of cut

More than 50% of our clients now choose the electronic height adjustment for the sha­per spindle.

The safety bar guides, great for
“end-grain” work (optional).

- Safety, since there is no pinch point
- No limitations on work piece height
- Problem free power feeder operation
- Impeccable workpiece ­finish
- Optimal chip removal

On request we can equip your “700 series” with start buttons for the main and scoring blades located directly on the sliding table, How about that for convenience!

The rip capacity comes standard with 31” (800 mm) or optional 49” (1250 mm). The rip fence almost hovers over the table. The single handed quick clamping and fine adjusment systems ensure quick and accurate setting of the rip fence. The easy to read rip scale is perfectly intergrated into the saw table. The aluminum rip fence plate can be adjusted foward and back to optimise the feed of work pieces. When working with narrow and thin cuts of wood or with the saw blade tilted, it can be inverted and used in the lying position.