Wide Belt Sander FW 1102 perform
Convincingly uncomplicated
Beneath a perfectly varnished, waxed or oiled surface, invariably lies a perfectly sanded surface. Felder wide belt sanders make their mark through solid construction, modern machine technology and high productivity. At Felder you have the choice between 37” and 43” (850 mm, 950 mm/1100 mm) of working width, various sanding modules, combination modules and much more. Felder quality, precision and perfect user friendliness are convincing in every way.
Your advantages at a glance:
- Pre and fine sanding in one working process
- Contact roller aggregate
- Fine sanding unit with segmented, electro pneumatic sanding pad, 25 mm segment width
- Digital grain compensation
- Vacuum table incl. ventilator
- Variable feed speed 2.5–18 m/min
- Brushing equipment
FELDER. Quality and precision in a nutshell
Since 1956, a guarantee for perfect results with excellent ease of use and reliability in regular professional use. Woodworkers are always enthusiastic about the individual and solid solutions for small and mid-sized businesses.
The most important highlights at a glance
Variants
Models- Your benefits
... Your decision for Felder, a risk-free decision
- The right machine for every budget
- Complete reliability in professional use
- Tailor made machine solutions
- High quality cast iron machine table and aggregates
- Innovative detail solutions derived from 60 years of experience – already included in the standard configuration
- First class manufacturing and finishing standards
- Intuitive application concepts
- Modern, distinct design
- Quality and precision from Austria
- Powerful and efficient
- Complete package: Comprehensive service support
Details
FW 1102 perform
Highest degree of processing safety is guaranteed when adjusting the working height: The workpiece thickness is determined by pressing the workpiece onto the lower sensor. The measuring device adjusts the passage height exactly to the material thickness, deducting the desired chip removal.
Both frame sanding and lacquer sanding can be performed with the electro-pneumatic segmented sanding shoe. The respective segments are activated based on the application.
Automatic thickness measurement facilitates adjustment of the machine to the desired workpiece thickness. The workpiece is measured directly on the machine without additional measuring devices being required. The required sanding depth can be set in + or - using the adjustment wheel. This wireless option makes it possible to measure the workpiece in front of the machine. The thickness is transferred wirelessly to the machine.
FW 1102 classic
Highest degree of processing safety is guaranteed when adjusting the working height: The workpiece thickness is determined by pressing the workpiece onto the lower sensor. The measuring device adjusts the passage height exactly to the material thickness, deducting the desired chip removal.
The feed speed can be adjusted between 2.5 - 10 m/min. The speed can also be adjusted during the sanding process. This guarantees that the optimum speed setting for the material and sanding belt grain can be achieved.
FW 950 classic
Highest degree of processing safety is guaranteed when adjusting the working height: The workpiece thickness is determined by pressing the workpiece onto the lower sensor. The measuring device adjusts the passage height exactly to the material thickness, deducting the desired chip removal.
The feed speed can be adjusted between 2.5 - 10 m/min. The speed can also be adjusted during the sanding process. This guarantees that the optimum speed setting for the material and sanding belt grain can be achieved.
The combination unit with a roller diameter of 125 mm is used for the calibration of solid wood. The electro-pneumatic sanding pad is lowered on to the workpiece at the exact correct height for the sanding process. This prevents veneered surfaces from being sanded through, at the front and rear.
FW 850 classic
Machine operators can choose between two feed speeds, 4 and 8 m/min. If necessary, the speed can also be adjusted during the sanding process.
The combination unit with a roller diameter of 125 mm is used for the calibration of solid wood. The electro-pneumatic sanding pad is lowered on to the workpiece at the exact correct height for the sanding process. This prevents veneered surfaces from being sanded through, at the front and rear.
Customer service & maintenance
Do you have any questions?
Showrooms
FELDER GROUP USA Headquarters Details
USA Headquarters | New Castle, Delaware Showroom
2 Lukens Drive, Suite 100-400
New Castle, DE 19720
Tel.: 866-792-5288
Fax: 302-322-9865
Business Hours: Mo. – Fr. | 8am – 5pm (EST)
FELDER GROUP USA Dallas Details
South Division | Dallas, Texas Showroom
1420 Halsey Way / Suite 100
Carrollton, TX 75007
Tel.: 866-792-5288
Business Hours: Mo. – Fr. | 8am – 5pm (CST)
FELDER GROUP USA West Sacramento Details
West Division | West Sacramento, California Showroom
1747 Enterprise Blvd.
West Sacramento, CA 95691
Tel.: 866-792-5288
Fax: 916-375-3194
Business Hours: Mo. – Fr. | 8am – 5pm (PST)
FELDER GROUP USA Anaheim Details
West Division | Anaheim, California Showroom
3531 E. Miraloma Ave., Unit 1
Anaheim, CA 92806
Tel.: 866-792-5288
Business Hours: Mo. – Fr. | 8am – 5pm (PST)
FELDER GROUP USA Denver Details
West Division | Denver, Colorado
Tel.: 866-792-5288
Business Hours: On appointment